Log in
Use our current forms
Listed building and development providers must use our instructions, forms, standards and specifications to meet job requirements. The forms below are updated periodically.
Acquiring land and easements
You must submit this Easement requirement form with your design plan.
Constructing new pipes
- 01 Design checklist
- 06A Inspection and test plan – water main laying (219 KB, DOC)
- 06B Inspection and test plan – leak-tight wastewater reticulation/carrier laying (134 KB, DOCX)
- 07 Design package certification
- 08C Construction commencement notice – water service connections – Sydney Water Tap in only
- 08D Construction commencement notice – minor works (wastewater) – Sydney Water Tap in only (74 KB, DOCX)
- 09 Entry restoration clearance (47 KB, DOC)
- 12A Field test report – hydraulic pressure test for water mains (130 KB, DOCX)
- 12B Field test report – compaction testing – wastewater and water pipelines (129 KB, DOCX)
- 12C Field test report – wastewater pipeline air testing – vacuum or low pressure (129 KB, DOCX)
- 12D Field test report – wastewater maintenance structures – vacuum test (129 KB, DOCX)
- 12E Field test report – CCTV inspection of wastewater pipeline summary (128 KB, DOCX)
- 13 Minor works – work as constructed report (75 KB, DOC)
- 17 Additional application information
- 17A eDeveloper application checklist
- 17B Land Under Development (LUD) submission checklist
- 19 Property service (main to meter) certification (19 KB, DOCX)
- 20 Application for new/additional provider capability
- 23 Provider capability checklist – constructor
- 25 Provider capability checklist – driller
- 26 Provider capability checklist – field tester
- 27 Pre-tender form for Sydney Water share of works (34 KB, XLSM)
- 28 Minor works PCP checklist
- 29 Our provider list for WSCs – add or change WSC key personnel
- 30 Our provider list for WSCs – remove WSC key personnel
- Permission to enter (owner/occupier)
- Project completion package (Major Works) WSC pre-submission checklist
Average daily water use
Flow isolation flow management (FIFM)
- Flow Isolation Flow Management procedure
- FIFM Form A: Request for FIFM (133 KB, DOCX)
- FIFM Form B: Key responsibilities contact list (128 KB, DOCX)
- HIDRA Template (75 KB, XLSX)
- FIFM Form D: Communication for FIFM (126 KB, DOCX)
- FIFM Form E: Trial isolation recommissioning schedule (133 KB, DOCX)
- FIFM Form F: Asset operational status (127 KB, DOCX)
- FIFM Form G: Asset operational status wet well levels (127 KB, DOCX)
- FIFM Form H: Schedule and method for proving FIFM (132 KB, DOCX)
- FIFM Form I: Monitoring plan (127 KB, DOCX)
- FIFM Form J: Recommissioning schedule (127 KB, DOCX)
- FIFM Form K: Milestone and hold point checklist (135 KB, DOCX)
- FIFM Form M: HIDRA authority to work for planned work (133 KB, DOCX)
- FIFM Form O: Trial isolation of less than 250 mm and W3 (130 KB, DOCX)