Listed pre-treatment for the auto industry

Your supplier directory

You'll find all the pre-treatment items we've listed and what requirements you need to follow on this page. If you need pre-treatment for your trade wastewater (sewage), you must remember to use only pre-treatment we've listed, size the pre-treatment to meet your maximum hourly flow and use a licensed plumber to install it.


We may ask you to remove any items of pre-treatment we haven't listed

Pre-treatment installation must meet Australian standards, Workplace Health and Safety standards and our guidelines. If a product has been recommended to you but it isn't listed here, call us on 9616 2485 or 1300 985 227 to check if it's suitable.

Or you can apply for approval (833 KB) to use different pre-treatment.

Oil water separators

To meet our requirements, you must:

  • ensure the oil water separator is the right size for your business needs
  • use the appropriate pump type
  • arrange for a licenced plumber to install the grease trap
  • use only lids or covers specified by the manufacturer for the installation
  • ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards and our requirements
  • ensure adequate clearance above the grease trap (at least equal to the deepest part of the greasetrap) to allow for safe, easy access to clean and inspect it
  • ensure stands, walkways and steps meet Australian Standards and Workplace Health and safety guidelines.

The following table lists oil water separators that meet our requirements for treating trade wastewater.

Oil water separators 

Manufacturer

Item

Pump

Aline-Pumps
1800 018 999

KWIKFLO KCPS-1000 (1,000L/h)
KWIKFLO KCPS-1500 (1,500L/h)
 

KDS 25-100

Baldwin Industrial Systems Pty Ltd
9545 2811

CPS MPAK-MPM-12 (1,000L/h)
CPS MPAK-BMM-64/2/12 (2,000L/h)
CPS MPSK-BMM-64/3/12 (3,000L/h)
CPS VPAK-MPV-12 (1,000L/h)
CPS VPAK-BMV-64/2/12 (2,000L/h)
CPS VPAK-BMV-64/4/12 (3,000L/h)

DS25
DS32
DS38
DS25
DS32
DS38

MakWater
1300 669 032

CB 1.0 SS-P vert tube pack (700L/h)
CL 1.5 SS-P vert tube pack (700L/h)
CL 3.0 SS-P vert tube pack (1,600L/h)
CL 1.5 SS-D vert tube pack (1,140L/h)


CP11 RJ - mono
CP11 RJ - mono
CP25 RJ - mono
CM 1000 - nitrile diaphragm

Eclipse Environmental
1300 272 650

 

Eclipse Hydroflow
1000S-fibreglass plates (1,000L/h)
3000S-fibreglass plates (3,000L/h)
5000S-fibreglass plates (5,000L/h)


DP25
DP40
DP50

Enviro Concepts (Aust.)
(07) 5535 9000

Oil water separator ISS VGS VF 15POF
SIOS25

Diaphragm ASM DS25

Everything Water Australia
07 3889 8546

Oil water separator DV1500NG, DV3000NG

DV1500NG use CP25 and DS25
DV3000NG use CP800 and DS/DT38

K.S Fibreglass Pty Ltd
0455 317 354

PTW OS15-fibreglass plates (1,500L/h)
PTY OS30-fibreglass plates (3,000L/h)

Kwikflo K/SM25

Kwikflo K/SM32
 

Industrial Separation Systems (ISS)
9524 6654

VGS V10P0F(1,000L/h)
VGS V15P0F (1,500L/h)
VGS V15P3F (1,500L/h)
VGS V15P3A (1,500L/h)
VGS V20P3A (2,000L/h)
VGS V30P3A (3,000L/h)
VGS V30SOF (3,000L/h)
 

ASM DS/DT25
ASM DS/DT25
ASM DS/DT25
ASM DS/DT25
ASM DS32
ASM DS38
ASM DS38
 

Industrial Separation Systems (ISS)
9524 6654

VGS V10POFP (700L/h)
VGS V15P3FP (1,600L/h)


CP11 RJ - mono
CP25 RJ - mono
 

Mascot Engineering
1300 885 295

Mascot CFI 15 (1,500L/h)
Mascot CFI 30 (3,000L/h)

ASM DS25
ASM DS32

Mike Miles Trade Waste
9672 4858

Marlin OS 15 (1,500L/h)
Marlin OS 30 (3,000L/h)

ASM DS25
ASM DS32

SEPA Pty Ltd
9542 2434

Sepa-SS 1500,ss plates (1,380L/h)
Sepa-SS 3000,ss plates (2,580L/h)
Sepa-SS 5000,ss plates (4,200 L/h)

DS or DT 25
DS or DT 32
DS or DT 38

Ultraspin Technology Pty Ltd
(03) 9872 5466

Ultraspin oil/water separator
OS 20 (1,500L/h)

OS 35 ( 3,500L/h)

Air operated diaphragm
ARO 666-120-322-C
ARO 666-170-322-C

Fox Environmental Pty Ltd
(07) 5437 8455

 

Separator system for light liquids
FX1000SS (1,000l/h)
FX1000SSD (1,000L/h)
FX1500SS (1,500l/h)
FX1500SSD (1,500L/h)
FX3000SS (3,000L/h)
FX3000SSD (3,000L/h)
FX6000SSD (6,000L/h)

Fox diaphragm pump
ASM diaphragm pump

H20 Cleanawater 
1800 353 788

TS series
1,000L/h
1,500L/h
2,000L/h
3,000L/h
4,000L/h

Diaphragm pump

 


Bucket traps - insink

The following table lists bucket traps - insink that meet our requirements for treating trade wastewater.

Bucket traps - insink

Manufacturer

Supplier's item

Everbright
0416 239 986

SA-001
SA-002 (stainless steel)

Ecoguardians
1300 55 66 28
0419 531 335

S450
SL340
S1100
SL850

3Monkeez
9627 6111

Sink model SSBW
Sink model SSBW_1 (stainless steel)

Stainless Metal Craft (Aust.) Pty Ltd
4735 5666

WSCK-1
ISW-50

Vinidex Pty Ltd
131 169

93026
93027
93030
93031


Bucket traps - infloor

The following table lists bucket traps - infloor that meet our requirements for treating trade wastewater.

Bucket traps - infloor

Manufacturer

Supplier's item

ACO Polycrete
4747 4000

ACO Wexel models 141876,141877,141878, 141879, 141880,141881,141882 must be fitted with a removable strainer and fixed secondary strainer from the following list:

  • ACO Wexel removable strainer 141920 and 141923
  • ACO Wexel fixed strainer 141921

ACO Polycrete
4747 4000

ACO Gully models 142039, 142040, 142041, 142042, 141976, 141977, 141978, 141979, 141988, 141989, 141990,141991, 141980, 141981, 141982, 141983, 141984, 141985, 141986, 141987 must be fitted with a removable strainer and a fixed secondary strainer from the following list:

  • ACO Gully removable strainer 408203, 408213, 413026, 413027
  • ACO Gully fixed secondary strainer 142000, 142001

ACO Polycrete
4747 4000

ACO Wexel models

  • 141969, with heelguard 150 x 150 mm with fixed and removeable strainers
  • 141970, with heelguard 150 x 150 mm with fixed and removeable strainers
  • 141970, with heelguard 200 x 200 mm with fixed and removeable strainers

ACO Polycrete
4747 4000

ACO Gully models 142043, 142044, 142045, 142046, 142047, 142048, 142049, 142050, 141922, 141993, 141994, 141995, 141996, 141997, 141988, 141999 must be fitted with a removable strainer and a fixed secondary strainer from the following list:

  • ACO Gully removable strainer 408223, 408233, 413029
     
  • ACO Gully fixed secondary strainer 142000, 142001, 142007, 142008

Blucher (Australia) Pty Ltd
(08) 8734 3426

780.200.000.03s
780.200.000.05s
780.300.000.03s
780.300.000.05s
(stainless steel)

Ecoguardians
1300 556 628
0419 531 335

F660 
F1600
FT660
FT1600

Galvin Engineering
9681 1366

Bucket floor trap combo 100PVC/HDPE Deep Body DB4D08S

KSH Shopfitting Equipment Pty Ltd
9642 3688
8064 1522
9642 3788

Round floor waste arrestor RW100
Square floor waste arrestor SW150
Vinyl floor waste arrestor SWV100

Larkin & Shoushani Solution Pty Ltd
0408 792 779
0418 659 511

Grate seal bucket trap (flexible polyurethane canister with glass fibre reinforced nylon basket)

Mascot Engineering Group
9644 1044

SBA-1A
SBA-2A (GRC)

MM Kembla
1800 804 631

KemDrain stainless 
X97800
X97801
X97802
X97803
X97804
X97805
Grated floor gully drains

OzFlow
(07) 3273 6847

Standard square top floor drains (and associated accessories):
A-DRS-100-E-S
A-DRS-150-E-S

Standard round top floor drains (and associated accessories):
A-DRS-100-RD-S
A-DRS-150-RD-S

Large floor drains (and associated accessories):
A-75-400-150-E-S
A-75-600-200-E-S

Inspection points:
A-REV-100-RD-S
A-REV-150-RD-S

Channels with grates and covers (and associated outlet sizes):
A-SRD-70
A-GKR-150
A-GKR-200
A-GKR-250
A-GKR-300
A-GKR-400
A-GKR-500

Associated floor drain accessories:
A-SF-218-4
A-SF-218-2
A-GVS-110
A-SFD-218-4
A-SFD-218-2
A-SBS-110-4
A-SBS-110-2
A-SF-283-4
A-SF-283-2
A-GVS-160
A-SFD-283-4
A-SFD-283-2
A-SBS-160-4
A-SBS-160-2
A-SFD-400-4
A-SFD-400-2
A-SFD-600-4
A-SFD-600-2
A-GVS-200
A-SBS-200-4
A-SBS-200-2

Speciality Plumbing Supplies
9416 8031

BA100SS
R150SR-BT
Q150SR-BT
Q200SR-BT
V100SSA-BT
R150SA
R150SSA
R150SA2
R225SA
R225SSA
R225SA2
Q150SA
Q150SSA
Q150SA2
Q200SA
Q200SSA
Q200SA2
LG100A-S
LG100A-SSA
LG100A2-S
LG100A2-SS
R225SA3
R22SSA3
Q200-150SA
Q200-150SSA
Q225ABA
Q225SA
Q225SSA
Q300DA
Q300NA
Q300SA
Q300SSA
LG150A-N
LG150A-S
LF150A-SS
LG150-SSA
Q150SR-BTM

Stainless steel, bronze, aluminium, nickel-bronze, chrome-plated bronze, grey cast iron, ductile iron

SPS 150 mm square push-in bucket trap
SPS 200 mm square push-in bucket trap

Stainless Metal Craft (Aust.) Pty Ltd
4735 5666

AT-1-round top
AT-1-100S-round top
AT-2-round top
AT-5-round top
AT-6-square top
AT-6-XHD-square top
AT-7-square top
AT-8-square top
AT-9-square top
AT-1-HST-hinged top
AT-2-HST-hinged top
FFW-1-square top flushing floor waste
CKT-125-square bar or heel guard grated floor drain
CKT-150-square bar or heel guard grated floor drain
CKT-200-square bar or heel guard grated floor drain
CKT-S-width as required-square bar or heel guard grated floor drain

Stainless steel in bucket traps/floor drains
Waste outlet with removable secondary/strainer/silt basket
Fixed tertiary strainer, rubber ring seal fitted for PVC or HDPE connection
VCR for vinyl floor as required

3Monkeez
9627 6111

Vinyl floor waste (code FW-100VR) copper alloy floor waste outlet with two rubber ring seals fitted on the outlet connection

  • grate size=-120 mm
     
  • outlet end=100 mm

  • designation DN120 x DN100

In floor bucket trap (code FW-100BRL) stainless steel floor waste outlet with removable strainer basket and fixed secondary strainer

  • grate size=-100 mm
     
  • outlet end=100 mm
     
  • designation DN100 x DN100

In floor bucket trap (code FW-150BS) stainless steel floor waste outlet with removable strainer basket and fixed secondary strainer and two rubber ring seals fitted on the outlet connection

In floor bucket trap (code FW-150BR) stainless steel floor waste outlet with removable strainer basket and fixed secondary strainer and two rubber ring seals fitted on the outlet connection

  • grate size=-150 mm
     
  • outlet end=100 mm

  • designation DN150 x DN100