- Cancel
  
  Search
- Contact us
- My Account Sydney Water Tap in

Listed pre-treatment for food businesses

Your supplier directory

Only use pre-treatment items listed below, size them to meet your maximum hourly flow, and have them installed by a licensed plumber to meet Australian standards, Workplace Health and Safety standards and our guidelines. We may ask you to remove items of pre-treatment that aren't listed. If you want to use an unlisted product, call 02 9616 2485 or 1300 985 227 to check first. Find out more about Plumbing for retail food businesses.

How to list new pre-treatment items
If you manufacture or supply items in the categories below, apply to list pre-treatment equipment in our area of operations. If you manufacture or supply other pre-treatment products, please email your request to businesscustomers@sydneywater.com.au.

Listed pre-treatment items

To be certain that your grease trap meets our requirements to treat trade wastewater, you must:

ensure it's the right size for your business needs
arrange for a licensed plumber to install it
use only lids or covers specified by the manufacturer for the installation
ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards, and our guidelines in the Plumbing for retail food businesses fact sheet
ensure adequate clearance above the grease trap (at least equal to the deepest part of the grease trap) to allow for safe, easy access to clean and inspect it
ensure stands, walkways and steps meet Australian Standards and Workplace Health and Safety guidelines.

Manufacturer	Supplier's item
AAA Grease Trap Pty Ltd 0416 454 748	AAA 1,000 L above-ground and below-ground installation material – glass-reinforced plastic
ACO Polycrete 02 4747 4000	Lipumax PPE – 1000 L in-ground installation only material – LLDPE NS5.5 142090 NS5.5 EcoJet 3555.64.00 NS5.5 HydroJet 3575.74.41 NS5.5 HydroJet 3575.74.31 NS5.5 HydroJet 3575.84.41 NS5.5 HydroJet 3575.84.31 NS5.5 HydroJet 3555.74.42 NS5.5 HydroJet 3555.74.32 NS5.5 HydroJet 3555.84.42 NS5.5 HydroJet 3555.84.32 above-ground installation only material – polyethylene
Aglass Pty Ltd 02 9790 8733	AGL1000 AGLFB1000 above-ground or in-ground installation material – glass-reinforced plastic (fibreglass)
Aline Pumps 1800 018 999	Aline Grease Arrestor MPT/AGA/1,000 L above-ground and below-ground installation material – polyethylene Kwikflo Grease Trap Range KGT1000 above-ground and below-ground installation material – polyethylene
BCP Precast 1300 248 456	GAP-01000 above or in-ground installation material – precast concrete
CV Plastics Pty Ltd 03 5442 8728	CV1000L above-ground or in-ground installation material – PVC sheet
Eclipse Environmental 02 9757 1212	GA1000S above-ground installation only material – stainless steel
Eclipse Environmental 02 9757 1212	GA1000F above-ground or in-ground installation material – glass-reinforced plastic (fibreglass)
Everhard Industries 13 19 26	80500, 80501 and 80502 above-ground class A below-ground class B & D material – polymer
Fibreglass Mould Makers Pty Ltd 0425 260 841	FMM1000L above-ground or in-ground installation material – fibre-reinforced plastic composite
GRAF Australia Pty Ltd 08 6499 2601	KLsepa.pop-1200L – equivalent to 1,000 L grease trap in-ground installation only – no risers are allowed material – injection-moulded polypropylene
GRAF Australia Pty Ltd 08 6499 2601	GRAF Australia GB grease arrestor: 600 L and 1,000 L for use above ground
Halgan Pty Ltd 02 9939 8030	Modular grease trap with SCD 1,000 L above-ground or in-ground installation material – polyethylene/polypropylene
Halgan Pty Ltd 02 9939 8030	Modular grease trap S series MGTS SCD 1,000 L above-ground or in-ground installation material – polyethylene
Halgan Pty Ltd 02 9939 8030	Halgan MGTA 1,000 L above-ground installation material – polyethylene
JB Collitt Pty Ltd 02 9773 8816	JBC1000 SS above-ground installation material – stainless steel
Mascot Engineering 1300 885 295	GA-100 above-ground or in-ground installation material – glass-reinforced concrete (must be epoxy coated internally)
Protector 1300 585 787	Protector Horizontal FRP Grease Arrestor below-ground installations B.GH.600 B.GH.1100 B.GH.1500 B.GH.2000 B.GH.3000 B.GH.4000 B.GH.5000 above-ground installations material – fibre-reinforced polymer A.GH.600 A.GH.1100 A.GH.1500 A.GH.2000 A.GH.3000 A.GH.4000 A.GH.5000
Port Capital Pty Ltd 0412 715 740	PCGT 1,000 L in-ground installation material – polyethylene
Stainless Metal Craft 02 4735 5666	GT-1 1,000 L above-ground self-supporting material
Viking Plastics Engineering Pty Ltd 03 9587 2297	NSW1000TB Thin Skin NSW1000PB Paneltim below-ground installation material – PVC and polyethylene NSW1000AGH Hinged lids NSW1000AGS Screw-in lids below-ground installation material – PVC and polyethylene

To be certain your grease trap meets our requirements to treat trade wastewater, you must:

ensure the grease trap is the right size for your business needs
arrange for a licensed plumber to install the grease trap
use only lids or covers specified by the manufacturer for the installation
ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards, and our guidelines in the Plumbing for retail food businesses fact sheet
ensure adequate clearance above the grease trap (at least equal to the deepest part of the grease trap) to allow for safe, easy access to clean and inspect it
ensure stands, walkways and steps meet Australian Standards and Workplace Health and Safety guidelines.

Manufacturer	Supplier's item
AAA Grease Trap Pty Ltd 0416 454 748	AAA 1,500 L above-ground and below-ground material – glass-reinforced plastic
ACO Polycrete 02 4747 4000	NS7 1500 EcoJet 142091 EcoJet 3555.64.00 HydroJet 3575.74.41 HydroJet 3575.74.31 HydroJet 3575.84.41 HydroJet 3575.84.31 HydroJet 3555.74.42 HydroJet 3555.74.32 HydroJet 3555.84.42 HydroJet 3555.84.32 above-ground installation only material – polyethylene
ACO Polycrete 02 4747 4000	Lipumax PPE – 1,500 L in-ground installation only material – LLDPE
Aglass 02 9790 8733	AGL1500 AGLFB1500 above-ground or in-ground installation material – glass-reinforced plastic (fibreglass)
Aline Pumps 1800 018 999	Aline Pumps Grease Arrestor MPT/AGA/1,500 L above-ground and below-ground installation material – polyethylene Kwikflo Grease Trap range KGT1500 above-ground and below-ground installation material – polyethylene
Austere Pumps 0429 079 569	Horizontal FRP Grease Arrestor below-ground and above-ground installation B.GH.1500 B.GH.1500C below-ground installation material – fibre-reinforced polymer A.GH.1500 A.GH.1500C above-ground installation material – fibre-reinforced polymer Vertical FRP Grease Arrestor below-ground installations only B.GV.1500 B.GV.1500C below-ground installation only material – fibre-reinforced polymer
BCP Precast 02 9612 5800	GAP-01500 above-ground or in-ground installation material – precast concrete
CV Plastics Pty Ltd 03 5442 8728	CV1500L above-ground or in-ground installation material – PVC sheet
Eclipse Environmental 02 9757 1212	GA1500S above-ground installation only material – stainless steel
Eclipse Environmental 02 9757 1212	GA1500F above-ground or in-ground installation material – glass-reinforced plastic (fibreglass)
Fibreglass Mould Makers Pty Ltd 02 9673 5536	FA-1.5GABS above-ground installation only material – glass-reinforced plastic (fibreglass)
GRAF Australia Pty Ltd 08 6499 2601	GRAF grease arrestor grease separator KLsepa.pop 1,500 L in-ground installation only – maximum 1,000 mm height of risers (longer risers require Sydney Water approval) material – low-density polyethylene body and lid (cast iron lid for Class B and D tanks) GRAF grease arrestor 1,600 L for use above ground
Halgan Pty Ltd 02 9939 8030	Modular grease trap with SCD 1,500 L above-ground or in-ground installation material – polyethylene/polypropylene
Halgan Pty Ltd 02 9939 8030	Modular grease trap S series MGTS 1,500 L above-ground or in-ground installation material – polyethylene/polypropylene
Halgan Pty Ltd 02 9939 8030	Halgan MGTA 1,500 L above-ground installation material – polyethylene
Mascot Engineering 1300 885 295	GA-150 above-ground or in-ground installation material – glass-reinforced concrete (must be epoxy coated internally)
Port Capital Pty Ltd 0412 715 740	PCGT1500L in-ground installation material – polyethylene
Stainless Metal Craft 02 4735 5666	GT1.5 above-ground self-supporting material – stainless steel
Viking Plastics Engineering Pty Ltd 03 9587 2297	NSW1500TB Thin skin NSW1500PB Paneltim below-ground installation only material – PVC and polyethylene NSW1500AGH Hinged lids NSW1500AGS Screw-in lids above-ground installation only material – PVC and polyethylene

To be certain your grease trap meets our requirements to treat trade wastewater, you must:

ensure it's the right size for your business needs
arrange for a licensed plumber to install it
use only lids or covers specified by the manufacturer for the installation
ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards, and our guidelines in the Plumbing for retail food businesses fact sheet
ensure adequate clearance above the grease trap (at least equal to the deepest part of the grease trap) to allow for safe, easy access to clean and inspect it
ensure stands, walkways and steps meet Australian Standards and Workplace Health and Safety guidelines.

Manufacturer	Supplier's item
AAA Grease Trap Pty Ltd 0416 454 748	AAA 2,000 L AAA 3,000 L AAA 4,000 L AAA 5,000 L above-ground and below-ground material – glass-reinforced plastic
ACO Polycrete 02 4747 4000	NS8.5 2,000 EcoJet 142092 EcoJet 3558.64.00 HydroJet 3578.74.41 HydroJet 3578.74.31 HydroJet 3578.84.41 HydroJet 3578.84.31 HydroJet 3558.74.42 HydroJet 3558.74.32 HydroJet 3558.84.42 HydroJet 3558.84.32 NS10 2,000 142093 EcoJet 3560.64.00 HydroJet 3580.74.41 HydroJet 3580.74.31 HydroJet 3580.80.41 HydroJet 3580.84.31 HydroJet 3560.74.42 HydroJet 3560.74.32 HydroJet 3560.84.42 HydroJet 3560.84.32 above-ground installation only material – polyethylene
ACO Polycrete 02 4747 4000	NS8.5 2,000 L 142097 Lipumax 3208.81.00 Lipumax 3208.82.00 Lipumax 3208.83.00 NS10 2,000 L 142098 Lipumax 3210.81.00 Lipumax 3210.82.00 Lipumax 3210.83.00 below-ground installation only material – polyethylene
ACO Polycrete 02 4747 4000	Lipumax PPE – 2,000 L Lipumax PPE – 3,000 L Lipumax PPE – 4,000 L Lipumax PPE – 5,000 L in-ground installation only material – LLDPE
Aglass Pty Ltd 02 9790 8733	AGL2000 – 2,000 L AGL3000 – 3,000 L AGL4000 – 4,000 L AGL5000 – 5,000 L AGLFB2000 – 2,000 L AGLFB3000 – 3,000 L AGLFB4000 – 4,000 L AGLFB5000 – 5,000 L above-ground or in-ground installation material – glass-reinforced plastic (fibreglass)
Aline Pumps 1800 018 999	Kwikflo grease separators KGS2000AG KGS2000BG KGS3000AG KGS3000BG KGS4000AG KGS4000BG KGS5000AG KGS5000BG above-ground and below-ground installation material – polyethylene KGT2000 KGT3000 KGT4001 KGT5000 above-ground and below-ground installation material – FRP
Australian Tanks 1300 282 657	ATQ Trade waste arrestor 5,000 L below-ground ATQS2000G ATQS3000G ATQS4000G ATQS5000G above-ground and below-ground installations material – concrete with steel fibres
Austere Pumps 0429 079 569	Horizontal FRP Grease Arrestor below-ground and above-ground installations B.GH.2000 B.GH.2000C B.GH.3000 B.GH.3000C B.GH.4000 B.GH.4000C B.GH.5000 B.GH.5000C below-ground installation A.GH.2000 A.GH.2000C A.GH.3000 A.GH.3000C A.GH.4000 A.GH.4000C A.GH.5000 A.GH.5000C above-ground installation material – fibre-reinforced polymer Vertical FRP Grease Arrestor below-ground installations only B.GV.2000 B.GV.2000C B.GV.3000 B.GV.3000C B.GV.4000 B.GV.4000C B.GV.5000 B.GV.5000C below-ground installation only material – fibre-reinforced polymer A.GV.2000 A.GV.2000C A.GV.3000 A.GV.3000C A.GV.4000 A.GV.4000C A.GV.5000 A.GV.5000C above-ground installation only material – fibre-reinforced polymer
BCP Precast 02 9612 5800	GAP02000 – 2,000 L GAP03000 – 3,000 L GAP04000 – 4,000 L GAP05000 – 5,000 L above-ground or in-ground installation material – precast concrete
CV Plastics 03 5442 8728	CV2000 – 2,000 L CV3000 – 3,000 L above-ground or in-ground installation material – PVC sheet
Eclipse Environmental 02 9757 1212	GA2000SS – 2,000 L GA3000SS – 3,000 L GA4000SS – 4,000 L GA5000SS – 5,000 L above-ground installation only material – stainless steel
Eclipse Environmental 02 9757 1212	GA2000F – 2,000 L GA3000F – 3,000 L GA4000F – 4,000 L GA5000F – 5,000 L above-ground or in-ground installation material – glass-reinforced plastic (fibreglass)
Fibreglass Mould Makers Pty Ltd 0425 260 841	FMM2000 – 2,000 L FMM3000 – 3,000 L FMM4000 – 4,000 L FMM5000 – 5,000 L above-ground or in-ground installation material – fibre-reinforced plastic composite
GRAF Australia Pty Ltd 08 6399 9824 0435 395 893	KLsepa.pop – 2,200 L equivalent to 2,000 L grease trap KLsepa.pop – 3,350 L equivalent to 3,000 L grease trap in-ground installation only – no risers are allowed material – injection-moulded polypropylene GRAF Grease Arrestor SC 2000 GRAF Grease Arrestor SC 3000 GRAF Grease Arrestor SC 4000 GRAF Grease Arrestor SC 5000 in-ground installation only – maximum 1,000 mm height of risers (longer risers require Sydney Water approval) material – low-density polyethylene
Halgan Pty Ltd 02 9939 8030	Modular grease trap with SCD MGT 2,000 L MGT 3,000 L MGT 4,000 L MGT 5,000 L above-ground or in-ground installation material – polyethylene/polypropylene
Halgan Pty Ltd 02 9939 8030	Modular grease trap S series MGTS 2,000 L MGTS 3,000 L MGTS 4,000 L MGTS 5,000 L above-ground or in-ground installation material – polyethylene/polypropylene
Halgan Pty Ltd 02 9939 8030	Halgan MGTA 2,000 L, MGTA 3,000 L, MGTA 4,000 L and MGTA 5,000 L above-ground installation material – polyethylene
JB Collitt Pty Ltd 02 9773 8816	JBC2000 SS – 2,000 L JBC3000 SS – 3,000 L JBC4000 SS – 4,000 L JBC5000 SS – 5,000 L above-ground installation only material – stainless steel
Mascot Engineering 1300 885 295	GA200 – 2,000 L GA200T – 2,000 L GA300 – 3,000 L GA400 – 4,000 L above-ground or in-ground installation material – glass-reinforced concrete (must be epoxy coated internally)
Port Capital Pty Ltd 0412 715 740	PCGT2000L PCGT3000L PCGT4000L PCGT5000L in-ground installation material – polyethylene
Stainless Metal Craft 02 4735 5666	GT-2 – 2,000 L GT-3 – 3,000 L GT-4 – 4,000 L GT-5 – 5,000 L above-ground self-supporting material – stainless steel
Viking Plastics Engineering Pty Ltd 03 9587 229	NSW2000TB Thin Skin NSW3000TB Thin Skin NSW4000TB Thin Skin NSW5000TB Thin Skin NSW2000PB Paneltim NSW3000PB Paneltim NSW4000PB Paneltim NSW5000PB Paneltim in-ground installation only material – PVC and polyethylene NSW2000AGH Hinged lids NSW3000AGH Hinged lids NSW4000AGH Hinged lids NSW5000AGH Hinged lids NSW2000AGS Screw-in lids NSW3000AGS Screw-in lids NSW4000AGS Screw-in lids NSW5000AGS Screw-in lids above-ground installation only material – PVC and polyethylene

Manufacturer	Supplier's item
Biogill Operations Pty Ltd 02 8513 7555	Biogill Treatment System Modular biological treatment system to reduce fats, oils and grease, and BOD

Manufacturer	Supplier's item
Eco Guardians 1300 55 66 28	Grease Guardian models D1, D2, D3, D4, D5 (stainless steel) for use upstream of an appropriately sized greaser arrestor only GGX7C, GGX15C, GGX15, GGX25 and GGX35
Goslyn Australia 0410 589 000	Goslyn Separator (compact oil removal technology for use upstream of an appropriately sized greaser arrestor only Models G20, G30, G40, G60, G80, G100, G200, G380
M A Griffith 02 9399 8444	Thermaco Big Dipper models W-150-IS-E, W-200-IS-E, W-250-IS-E, W-500-IS-E for use upstream of an appropriately sized greaser arrestor only
MACTRAP +64 21 455 566 Supplied by Viking Plastics Engineering Pty Ltd 03 9587 2297	Grease Boss G5 Combi (0.5 L/s), G15 (1.5 L/s), G25 (2.5 L/s) and G25 Combi (2.5 L/s) undersink SS 304 units for use upstream of an appropriately sized grease arrestor only
Thermaco, Inc. +1 336 629 4561 ext 242 (USA)	Thermaco Mighty Trap (compact oil removal technology) Models G-25-230 and G-35-230 for use upstream of an appropriately sized greaser arrestor only
Wise Water Solutions Pty Ltd 0418 329 762	Goslyn Model GOS20 (compact oil removal technology with grease filter or surge control) for use upstream of an appropriately sized grease arrestor only

Manufacturer	Supplier's item
Eco Guardians 1300 55 66 28 0419 531 335	S450 SL340 S1100 SL850
Everbright 0416 239 986	SA-001 SA-002 (stainless steel)
KSH 02 9749 7457	SW0001 in-sink basket trap
3monkeez 02 9627 6111	SCRAP-S Scraptrap Sink Waste Arrestor – cast S/S – suit 127 mm outlet SCRAP-S316 Scraptrap Sink Waste Arrestor – cast S/S – suit 127 mm outlet SCRAP-S-50 Scraptrap Sink Waste Arrestor – cast S/S – suit 50 mm outlet SCRAP-S-50-316 Scraptrap Sink Waste Arrestor – cast S/S – suit 50 mm outlet SCRAP-S-90 Scraptrap Sink Waste Arrestor – cast S/S – suit 90 mm outlet SCRAP-S-90-316 Scraptrap Sink Waste Arrestor – cast S/S – suit 90 mm outlet SSBW-3 Scraptrap Sink Waste Arrestor – suit 90 mm outlet SSBW-40 Scraptrap Sink Waste Arrestor – suit 40 mm outlet SSBW-50 Scraptrap Sink Waste Arrestor– suit 50 mm outlet SSDBW Scraptrap Sink Waste Arrestor – suit 90 mm outlet SSBW-1 Scraptrap Sink Waste Arrestor – suit 90 mm outlet
SPS 02 9417 1900	SPS ISW90T in-sink basket trap
Stainless Metal Craft (Aust.) Pty Ltd 02 4735 5666	WSCK-1 ISW-50
Stoddart 07 3440 7676 0411 701 092	Simply stainless in-sink basket waste 39.SWB Plastic and stainless steel
Vinidex Pty Ltd 131 169	93026 93027 93030 93031

Manufacturer	Supplier's item
ACO Polycrete 02 4747 4000	ACO Wexel models 141876, 141877, 141878, 141879, 141880, 141881, 141882 must be fitted with a removable strainer and fixed secondary strainer from the following list: ACO Wexel removable strainer 141920 and 141923 ACO Wexel fixed strainer 141921
ACO Polycrete 02 4747 4000	ACO Gully models 142039, 142040, 142041, 142042, 141976, 141977, 141978, 141979, 141988, 141989, 141990, 141991, 141980, 141981, 141982, 141983, 141984, 141985, 141986, 141987 must be fitted with a removable strainer and a fixed secondary strainer from the following list: ACO Gully removable strainer 408203, 408213, 413026, 413027 ACO Gully fixed secondary strainer 142000, 142001
ACO Polycrete 02 4747 4000	ACO Wexel models 141969, with heel guard 150 x 150 mm with fixed and removable strainers 141970, with heel guard 150 x 150 mm with fixed and removable strainers 141970, with heel guard 200 x 200 mm with fixed and removable strainers
ACO Polycrete 02 4747 4000	ACO Gully models 142043, 142044, 142045, 142046, 142047, 142048, 142049, 142050, 141922, 141993, 141994, 141995, 141996, 141997, 141988, 141999 must be fitted with a removable strainer and a fixed secondary strainer from the following list: ACO Gully removable strainer 408223, 408233, 413029 ACO Gully fixed secondary strainer 142000, 142001, 142007, 142008
Blücher (Australia) Pty Ltd 08 8734 3426	780.200.000.03s 780.200.000.05s 780.300.000.03s 780.300.000.05s (stainless steel)
Eco Guardians 1300 556 628 0419 531 335	F660 F1600 FT660 FT1600
Galvin Engineering 02 9681 1366	Bucket floor trap combo 100PVC/HDPE Deep Body DB4D08S
KSH Shopfitting Equipment Pty Ltd 02 9642 3688 02 8064 1522 02 9642 3788	Round floor waste arrestor RW100 Square floor waste arrestor SW150 Vinyl floor waste arrestor SWV100
Larkin & Shoushani Solutions Pty Ltd 0408 792 779 0418 659 511	Grate seal bucket trap (flexible polyurethane canister with glass fibre-reinforced nylon basket)
Mascot Engineering Group 02 9644 1044	SBA-1A SBA-2A (GRC)
MM Kembla 1800 804 631	KemDrain stainless X97800 X97801 X97802 X97803 X97804 X97805 Grated floor gully drains
OzFlow 07 3273 6847	Standard square top floor drains (and associated accessories): A-DRS-100-E-S A-DRS-150-E-S Standard round top floor drains (and associated accessories): A-DRS-100-RD-S A-DRS-150-RD-S Large floor drains (and associated accessories): A-75-400-150-E-S A-75-600-200-E-S Inspection points: A-REV-100-RD-S A-REV-150-RD-S Channels with grates and covers (and associated outlet sizes): A-SRD-70 A-GKR-150 A-GKR-200 A-GKR-250 A-GKR-300 A-GKR-400 A-GKR-500 Associated floor drain accessories: A-SF-218-4 A-SF-218-2 A-GVS-110 A-SFD-218-4 A-SFD-218-2 A-SBS-110-4 A-SBS-110-2 A-SF-283-4 A-SF-283-2 A-GVS-160 A-SFD-283-4 A-SFD-283-2 A-SBS-160-4 A-SBS-160-2 A-SFD-400-4 A-SFD-400-2 A-SFD-600-4 A-SFD-600-2 A-GVS-200 A-SBS-200-4 A-SBS-200-2
Speciality Plumbing Supplies 02 9416 8031	BA100SS R150SR-BT Q150SR-BT Q200SR-BT V100SSA-BT R150SA R150SSA R150SA2 R225SA R225SSA R225SA2 Q150SA Q150SSA Q150SA2 Q200SA Q200SSA Q200SA2 LG100A-S LG100A-SSA LG100A2-S LG100A2-SS R225SA3 R22SSA3 Q200-150SA Q200-150SSA Q225ABA Q225SA Q225SSA Q300DA Q300NA Q300SA Q300SSA LG150A-N LG150A-S LF150A-SS LG150-SSA Q150SR-BTM stainless steel, bronze, aluminium, nickel-bronze, chrome-plated bronze, grey cast iron, ductile iron SPS 150 mm square push-in bucket trap SPS 200 mm square push-in bucket trap
Stainless Metal Craft (Aust.) Pty Ltd 02 4735 566	AT-1 – round top AT-1-100S – round top AT-2 – round top AT-5 – round top AT-6 – square top AT-6-XHD – square top AT-7 – square top AT-8 – square top AT-9 – square top AT-1-HST – hinged top AT-2-HST – hinged top FFW-1 – square top flushing floor waste CKT-125 – square bar or heel guard grated floor drain CKT-150 – square bar or heel guard grated floor drain CKT-200 – square bar or heel guard grated floor drain CKT-S – width as required – square bar or heel guard grated floor drain stainless steel in bucket traps / floor drains waste outlet with removable secondary strainer / silt basket fixed tertiary strainer, rubber ring seal fitted for PVC or HDPE connection VCR for vinyl floor as required
3monkeez 02 9627 6111	FW-100VR Scraptrap Square Floor Waste Arrestor FW-100BRL-304 Scraptrap Round Drop In-Floor Waste Arrestor FW-100BRL-316 Scraptrap Round Drop In-Floor Waste Arrestor FW-100VRBT-304 Scraptrap 150 mm Round Floor Waste Arrestor – suit vinyl floor FW-100VRBT-316 Scraptrap 150 mm Round Floor Waste Arrestor – suit vinyl floor FW-150BR-304 Scraptrap 150 mm Round Floor Waste Arrestor FW-150BR-316 Scraptrap 150 mm Round Floor Waste Arrestor FW-150BS-304 Scraptrap 150 mm Square Floor Waste Arrestor FW-150BS-316 Scraptrap 150 mm Square Floor Waste Arrestor FW-200BSM-304 Scraptrap 200 mm Square Floor Waste Arrestor FW-200BSM-316 Scraptrap 200 mm Square Floor Waste Arrestor FW-225BS-304 Scraptrap 225 mm Square Floor Waste Arrestor FW-225BS-316 Scraptrap 225 mm Square Floor Waste Arrestor FW-250BS-304 Scraptrap 250 mm Square Floor Waste Arrestor FW-250BS-316 Scraptrap 250 mm Square Floor Waste Arrestor FW-300BS-304. Scraptrap 300 mm Square Floor Waste Arrestor FW-300BS-316 Scraptrap 300 mm Square Floor Waste Arrestor FW-200BS-150-304 Scraptrap 200 mm Square Floor Waste Arrestor – suit 150 mm pipe FW-200BS-150-316 Scraptrap 200 mm Square Floor Waste Arrestor – suit 150 mm pipe FW-200VRBT-150-304 Scraptrap 200 mm Round Floor Waste Arrestor – suit vinyl floor – suit 150 mm pipe FW-200VRBT-150-316 Scraptrap 200 mm Round Floor Waste Arrestor – suit vinyl floor – suit 150 mm pipe FW-225BS-150-304 Scraptrap 225 mm Square Floor Waste Arrestor – suit 150 mm pipe FW-225BS-150-316 Scraptrap 225 mm Square Floor Waste Arrestor – suit 150 mm pipe FW-250BS-150-304 Scraptrap 250 mm Square Floor Waste Arrestor – suit 150 mm pipe FW-250BS-150-316 Scraptrap 250 mm Square Floor Waste Arrestor – suit 150 mm pipe FW-300BS-150-304. Scraptrap 300 mm Square Floor Waste Arrestor – suit 150 mm pipe FW-300BS-150-316 Scraptrap 300 mm Square Floor Waste Arrestor – suit 150 mm pipe FW-100VRBT Scraptrap 150 mm Round Floor Waste Arrestor – suit vinyl floor FW-200BS-304 Scraptrap 200 mm Square Floor Waste Arrestor FW-200BS-316 Scraptrap 200 mm Square Floor Waste Arrestor

Manufacturer	Supplier's item
Eclipse Environmental 02 9757 1212	Eclipse under-sink unit (10 mm thick HDPE) USU1000 with Davey pump / D15VA 110 L/min
FRP Technologies Pty Ltd 02 9673 5536	FRP PTW005 under-sink pump unit with Davey sump pump DV15A 120 L/min @ 6 m head
Gebel Aquasafe 02 4722 9696	Gebel Aquasafe under-sink unit with Hyflo submersible vortex pump / HV04 100 L/min @ 7 m head
Halgan Pty Ltd 02 9972 1355	Halgan ECOTEC grease extractor S100 under-sink pump unit – EUS/95/HV05A for above-ground use only

You can only use these grease extractors where site-specific conditions, including restricted space, prevent you from installing a 1,000 L grease trap.

You must:

provide a report from a hydraulic consultant outlining why a grease trap can't be installed
get our permission before installation
arrange for a licensed plumber to install the grease extractor
ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards and our Plumbing for retail food businesses guidelines
ensure adequate clearance above the grease trap (at least equal to the deepest part of the grease trap) to allow for safe, easy access to clean and inspect it
ensure stands, walkways and steps meet Australian Standards and Workplace Health and Safety guidelines.

Which grease traps meet our requirements?

Manufacturer	Item
Aglass Pty Ltd 02 9790 8733	AGL1000 AGL-500-GA-SL-A AGL-500-GA-SL-B Both fitted with Zabel filter
Halgan Pty Ltd 02 9972 1355	ECOTEC s100 Grease Extractor
Gebel Aquasafe 02 4722 9696	Aquasafe Grease Arrestor with Zabel A300 filter
Eclipse Environmental 02 9757 1212	Delta 1

Manufacturer	Supplier's item
Environmental Biotech 0418 688 849	Grease Eradication System – GES

Listed pre-treatment for food businesses

Your supplier directory

Listed pre-treatment items

Grease traps 1,000 litres

Grease traps 1,500 litres

Grease traps 2,000–5,000 litres

Biological treatment systems

Grease removal devices

Bucket traps – in-sink

Bucket traps – in-floor

Under-sink pump wells for use with authorised grease traps

Grease extractors

Which grease traps meet our requirements?

Biological additives