Listed pre-treatment for food businesses
If you need pre-treatment, you must:
- use only pre-treatment we've listed
- size the pre-treatment to meet your maximum hourly flow
- ensure a licenced plumber installs it.
We may ask you to remove any items of pre-treatment we don't list.
If you're recommended a product that isn't listed here, please call us on 9616 2485 or 1300 985 227 to check if it's suitable.
The installation must meet Australian standards, Workplace Health and Safety standards and our guidelines. Find out more about Plumbing for retail food businesses.
We may ask you to rectify works that don't meet these requirements.
Find out which pre-treatment items we've listed
To ensure your grease trap meets our requirements to treat trade wastewater, you must:
- ensure it's the right size for your business needs
- arrange for a licenced plumber to install it
- use only lids or covers specified by the manufacturer for the installation
- ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards, and our guidelines in the Plumbing for retail food businesses fact sheet
- ensure adequate clearance above the grease trap (at least equal to the deepest part of the greasetrap) to allow for safe, easy access to clean and inspect it
- ensure stands, walkways and steps meet Australian Standards and Workplace Health and safety guidelines.
Which 1,000L grease traps meet our requirements?
| Manufacturer | Supplier's item |
|---|---|
| AAA GREASE TRAP PTY LTD 0416 454 748 |
AAA 1000 L Above and below ground Material - Glass Reinforce Plastic |
| ACO Polycrete (02) 4747 4000 |
Lipumax NS4 142095 3204.81.00 3204.82.00 3204.83.00
NS5.5 142090 Eco-Jet 3555.64.00 Hydro-Jet 3575.74.41 Hydro-Jet 3575.74.31 Hydro-Jet 3575.84.41 Hydro-Jet 3575.84.31 Hydro-Jet 3555.74.42 Hydro-Jet 3555.74.32 Hydro-Jet 3555.84.42 Hydro-Jet 3555.84.32
|
| AglassPty Ltd (02) 9790 8733 |
AGL1000
|
| All-Pumps Sales & Service 1300 255 786 |
Kwikflo grease separators
|
| Aline Pumps 1800 018 999 |
Aline Grease Arrestor1000
|
| BCP Precast 02 9612 5800 |
GAP-01000
|
| CV Plastics P/L (03) 5442 8728 |
CV1000L
|
| Eclipse Environmental 9721 3071 |
GA1000S
|
| Eclipse Environmental 9721 3071 |
GA1000F
|
| Everhard Industries 13 19 26 |
80502
|
| Fibreglass Mould Makers Pty Ltd 0425 260 841 |
FMM1000L
|
| In-ground installation only No risers are allowed KLsepa.pop-1200L equivalent to 1000 L grease trap Material - Injection moulded polypropylene |
|
| Halgan Pty Ltd 9939 8030 |
Modular grease trap with SCD 1000L
|
| Halgan Pty Ltd 9939 8030 |
Modular grease trap S series MGTDS SCD 1000L
|
| Halgan Pty Ltd 9939 8030 |
Halgan MGTA 1000L
|
| JB Collitt Pty Ltd 9773 8816 |
JBC1000 SS
|
| Mascot Engineering 1300 885 295 |
GA-100
|
| Stainless Metal Craft 4735 5666 |
GT-1 1000L
|
| Viking Plastics Engineering Pty Ltd 03 9587 2297 |
NSW1000TB Thin Skin NSW1000PB Paneltim
NSW1000AGH Hinged Lids NSW1000AGS Screw-in Lids
|
To ensure your grease trap meets our requirements to treat trade wastewater, you must:
- ensure the grease trap is the right size for your business needs
- arrange for a licenced plumber to install the grease trap
- use only lids or covers specified by the manufacturer for the installation
- ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards, and our guidelines in the Plumbing for retail food businesses fact sheet
- ensure adequate clearance above the grease trap (at least equal to the deepest part of the greasetrap) to allow for safe, easy access to clean and inspect it
- ensure stands, walkways and steps meet Australian Standards and Workplace Health and safety guidelines.
Which 1,500L grease traps meet our requirements?
| Manufacturer | Supplier's item |
|---|---|
| AAA GREASE TRAP PTY LTD 0416454748 |
AAA 1,500 L Above and below ground Material-Glass Reinforced Plastic |
| ACO Polycrete 4747 4000 |
NS7 1500 Eco-Jet 142091 Eco-Jet 3555.64.00 Hydro-Jet 3575.74.41 Hydro-Jet 3575.74.31 Hydro-Jet 3575.84.41 Hydro-Jet 3575.84.31 Hydro-Jet 3555.74.42 Hydro-Jet 3555.74.32 Hydro-Jet 3555.84.42 Hydro-Jet 3555.84.32
|
| ACO Polycrete 4747 4000 |
NS5.5 1500 Lipumax 3205.80.00 Lipumax 3205.80.10 Lipumax 3205.81.00 Lipumax 3205.81.10 Lipumax 3205.82.00 Lipumax 3205.82.10 Lipumax 3205.83.00 Lipumax 3205.83.10 NS7 1500 Lipumax 142096 Lipumax 3207.81.00 Lipumax 3207.82.00 Lipumax 3207.83.00
|
| Aglass (02) 9790 8733 |
AGL 1500
|
| Aline Pumps 1800018999 |
Aline Pumps Grease Arrestor1500
|
| All-Pumps Sales & Service 1300 255 786 |
Kwikflo Grease Separators KGS1500AG KGS1500BG
|
| BCP Precast 02 9612 5800 |
GAP-01500
|
| CV Plastics P/L (03) 5442 8728 |
CV1500L
|
| Eclipse Environmental 9721 3071 |
GA1500S
|
| Eclipse Environmental 9721 3071 |
GA1500F
|
| Fibreglass Mould Makers Pty Ltd 9673 5536 |
FA-1.5GABS
|
| Halgan Pty Ltd 9939 8030 |
Modular grease trap with SCD 1,500L
|
| Halgan Pty Ltd 9939 8030 |
Modular grease trap S series MGTS 1,500L
|
| Halgan Pty Ltd 9939 8030 |
Halgan MGTA 1500L
|
| Industrial Separation Systems 9524 6654 |
VGS 1,500L/hr grease separator with mono pump CP25
|
| JB Collitt Pty Ltd 97773 8816 |
JBC2000SS
|
| Mascot Engineering 1300 885 295 |
GA-150
|
| Stainless Metal Craft 4735 5666 |
GT1.5
|
| Viking Plastics Engineering Pty Ltd 03 9587 2297 |
NSW1500TB Thin Skin NSW1500PB Paneltim
NSW1500AGS Screw-in Lids
|
To ensure your grease trap meets our requirements to treat trade wastewater, you must:
- ensure it's the right size for your business needs
- arrange for a licenced plumber to install it
- use only lids or covers specified by the manufacturer for the installation
- ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards, and our guidelines in the Plumbing for retail food businesses fact sheet
- ensure adequate clearance above the grease trap (at least equal to the deepest part of the greasetrap) to allow for safe, easy access to clean and inspect it
- ensure stands, walkways and steps meet Australian Standards and Workplace Health and safety guidelines.
Which 2,000-5,000L grease traps meet our requirements?
| Manufacturer | Supplier's item |
|---|---|
| AAA GREASE TRAP PTY LTD 0416454748 |
AAA 2,000 L AAA 3,000 L AAA 4,000 L AAA 5,000 L Above and below ground Material-Glass Reinforced Plastic |
| ACO Polycrete 4747 4000 |
NS8.5 2,000 Eco-Jet 142092 Eco-Jet 3558.64.00 Hydro-Jet 3578.74.41 Hydro-Jet 3578.74.31 Hydro-Jet 3578.84.41 Hydro-Jet 3578.84.31 Hydro-Jet 3558.74.42 Hydro-Jet 3558.74.32 Hydro-Jet 3558.84.42 HydroJet 3558.84.32 NS10 2,000 142093 Eco-Jet 3560.64.00 HydroJet 3580.74.41 HydroJet 3580.74.31 HydroJet 3580.84.41 HydroJet 3580.84.31 HydroJet 3560.74.42 HydroJet 3560.74.32 HydroJet 3560.84.42 HydroJet 3560.84.32
|
| ACO Polycrete 4747 4000 |
NS8.5 2000 L 142097 Lipumax 3208.81.00 Lipumax 3208.82.00 Lipumax 3208.83.00 NS10 2000 L 142098 Lipumax 3210.81.00 Lipumax 3210.82.00 Lipumax 3210.83.00
|
| ACO Polycrete 4747 4000 |
Lipumax - G 3,000L Lipumax - G 4,000L Lipumax - G 5,000L
|
| Aglass Pty Ltd (02) 9790 8733 |
AGL2000-2,000L AGL3000-3,000L AGl4000-4,000L AGL5000-5,000L
|
| All-Pumps Sales & Service 1300 255 786 |
Kwikflo Grease Separators KGS2000AG KGS2000BG KGS3000AG KGS3000BG KGS4000AG KGS4000BG KGS5000AG KGS5000BG
|
| Australian Tanks 1300 282 657 |
ATQ Trade waste Arrestor 5000L Below ground |
| BCP Precast 02 9612 5800 |
GAP02000-2,000L GAP03000-3,000L GAP04000-4,000L GAP05000-5,000L
|
| CV Plastics (03) 5442 8728 |
CV2000 2,000L CV3000 3,000L
|
| Eclipse Environmental 9721 3071 |
GA2000SS-2,000L GA3000SS-3,000L GA4000SS-4,000L GA5000SS-5,000L
|
| Eclipse Environmental 9721 3071 |
GA2000F-2,000L GA3000F-3,000L GA4000F-4,000L GA5000F-5,000L
|
| Fibreglass Mould Makers Pty Ltd 0425 260 841 |
FMM2000 2,000L FMM3000 3,000L FMM4000 4,000L FMM5000 5,000L
|
| GRAF Australia Pty Ltd 0863999824 0435395893 |
In-ground installation only No risers are allowed KLsepa.pop-2200L equivalent to 2000 L grease trap KLsepa.pop-3350L equivalent to 3000 L grease trap Material - Injection moulded polypropylene |
| Halgan Pty Ltd 9939 8030 |
Modular grease trap with SCD MGT 2,000L MGT 3,000L MGT 4,000L MGT 5,000L
|
| Halgan Pty Ltd 9939 8030 |
Modular grease trap S series MGTS 2,000L MGTS 3,000L MGTS 4,000L MGTS 5,000L
|
| Halgan Pty Ltd 9939 8030 |
Halgan MGTA 2000L, MGTA 3000L, MGTA 4000L and MGTA 5000L l
|
| Industrial Separation Systems 9524 6654 |
VGS 1,500L/h grease separator (with mono pump CP25) VGS 2,500L/h grease separator (with mono pump CP800)
|
| JB Collitt Pty Ltd 9773 8816 |
JBC2000 SS 2,000L JBC3000 SS 3,000L JBC4000 SS 4,000L JBC5000 SS 5,000L
|
| Mascot Engineering 1300 885 295 |
GA200-2,000L GA200T 2,000L GA300-3,000L GA400-4,000L
|
| Stainless Metal Craft 4735 5666 |
GT-2 2,000L GT-3 3,000L GT-4 4,000L GT-5 5,000L
|
| Viking Plastics Engineering Pty Ltd 03 9587 2297 |
NSW2000TB Thin Skin NSW3000TB Thin Skin NSW4000TB Thin Skin NSW5000TB Thin Skin NSW2000PB Paneltim NSW3000PB Paneltim NSW4000PB Paneltim NSW5000PB Paneltim
NSW3000AGH Hinged Lids NSW4000AGH Hinged Lids NSW5000AGH Hinged Lids NSW2000AGS Screw-in Lids NSW3000AGS Screw-in Lids NSW4000AGS Screw-in Lids NSW5000AGS Screw-in Lids
|
| Manufacturer | Supplier's item |
|---|---|
| Biogill Operations Pty Ltd 02 8513 7555 |
Biogill Treatment System Modular biological treatment system to reduce Fats Oils & Grease and BOD |
| Manufacturer | Supplier's item |
|---|---|
| Goslyn Australia 0410 589 000 |
GOSLYN Separator (compact oil removal technology
|
| M A Griffith (02) 9399 8444 |
Thermaco Big Dipper models W-150-IS-E, W-200-IS-E, W-250-IS-E, W-500-IS-E
|
| Ecoguardians 1300 55 66 28 |
Grease Guardian models; D1.D2, D3, D4, D5 (stainless steel)
|
| Wise Water Solutions Pty Ltd 0418 329 762 |
GOSLYN Model GOS20 (compact oil removal technology with grease filter or surge control)
|
| Thermaco, Inc. +1 336 629 4561 ext 242 (USA) |
Thermaco Mighty Trap (compact oil removal technology) Models G-25-230 and G-35-230
|
| Manufacturer | Supplier's item |
|---|---|
| Everbright 0416 239 986 |
SA-001 SA-002 (stainless steel) |
| Ecoguardians 1300 55 66 28 |
S450 SL340 S1100 SL850 |
| Rovumstil P/L trading as Club Stainless and Accessories (02) 4587 9887 |
Sink model SSBW Sink model SSBW_1 (stainless steel) |
| Stainless Metal Craft (02) 4735 5666 (02) 4735 7950 |
WSCK-1 ISW-50 Insink Basket Waste ISW125 ISW125-PP Plastic Body ISW125-SS Butterfly ISW125-SS Stainless Steel |
| Stoddart (07) 3440 7676 0411 701 092 |
Simply Stainless In Sink Basket Waste 39.SWB Plastic and Stainless Steel |
| Vinidex Pty Ltd 131169 |
93026 93027 93030 93031 |
| Manufacturer | Supplier's item |
|---|---|
| ACO Polycrete (02) 4747 4000 |
ACO Wexel models 141876,141877,141878, 141879, 141880,141881,141882 must be fitted with both:
|
| ACO Polycrete (02) 4747 4000 |
ACO Gully models 142039, 142040, 142041, 142042, 141976, 141977, 141978, 141979, 141988, 141989, 141990,141991, 141980, 141981, 141982, 141983, 141984, 141985, 141986, 141987 must be fitted with both:
|
| ACO Polycrete (02) 4747 4000 |
ACO Wexel models
|
| ACO Polycrete (02) 4747 4000 |
ACO Gully models 142043, 142044, 142045, 142046, 142047, 142048, 142049, 142050, 141992, 141993, 141994, 141995, 141996, 141997, 141988, 141999 must be fitted with a both:
|
| Blucher (Australia) Pty Ltd (08) 8734 3426 |
780.200.000.03s 780.200.000.05s 780.300.000.03s 780.300.000.05s (Stainless steel) |
| Ecoguardians 1300 55 66 28 |
F660 F1600 FT660 FT1600 |
| Galvin Engineering (02) 9681 1366 |
Bucket floor trap combo 100PVC/HDPE Deep Body DB4D08S |
| KSH Shopfitting Equipment P/L (02) 9642 3688 (02) 8064 1522 (02) 9642 3788 |
Round floor waste arrestor RW100 Square floor waste arrestor SW150 Vinyl floor waste arrestor SWV100 |
| Larkin & Shoushani Solutions Pty Ltd 0408 792 779 0418 659 511 |
Grate seal bucket trap (flexible polyurethane canister with glass fibre reinforced nylon basket) |
| Mascot Engineering Group (02) 9644 1044 |
SBA-1A SBA-2A (GRC) |
| MM Kembla 18008 04631 |
KemDrain Stainless X97800 X97801 X97802 X97803 X97804 X97805 Grated floor gully drains |
| Speciality Plumbing Supplies (02) 9416 8031 |
BA100SS R150SR-BT Q150SR-BT Q200SR-BT V100SSA-BT R150SA R150SSA R150SA2 R225SA R225SSA R225SA2 Q150SA Q150SSA Q150SA2 Q200SA Q200SSA Q200SA2 LG100A-S LG100A-SSA LG100A2-S LG100A2-SS R225SA3 R22SSA3 Q200-150SA Q200-150SSA Q225ABA Q225SA Q225SSA Q300DA Q300NA Q300SA Q300SSA LG150A-N LG150A-S LF150A-SS LG150-SSA Q150SR-BTM Stainless steel, bronze, aluminium, nickel-bronze, chrome-plated bronze, grey cast iron, ductile iron SPS 150mm square push-in bucket trap SPS 200mm square push-in bucket trap |
| 3Monkeez (02) 9627 6111 |
Vinyl floor waste (code FW-100VR) copper alloy floor waste outlet with two rubber ring seals fitted on the outlet connection
In floor bucket trap (code FW-150BR) stainless steel floor waste outlet with removable strainer basket and fixed secondary strainer and two rubber ring seals fitted on the outlet connection
|
| Manufacturer | Supplier's item |
|---|---|
| Eclipse Environmental (02) 9721 3071 |
Eclipse under-sink unit (10mm thick HDPE) USU1000 with Davey pump/D15VA 110L/min |
| FRP Technologies P/L (02) 9673 5536 |
FRP PTW005 undersink pump unit with Davey sump pump DV15A 120L/min @ 6m head |
| Gebel Aquasafe (02) 4722 9696 |
Gebel Aquasafe undersink unit with Hyflo submersible vortex pump / HV04 100L/min @ 7m head |
| Halgan Pty Ltd (02) 9972 1355 |
Halgan ECOTEC grease extractor S100 undersink pump unit -EUS/95/HV05A For above ground use only |
You can only use these grease extractors where site specific conditions, including restricted space, prevent you installing a 1,000L grease trap.
You must:
- provide a report from a hydraulic consultant outlining why a grease trap can't be installed
- get our permission before installation
- arrange for a licenced plumber to install the grease extractor
- ensure the installation and lids meet Australian Standards, Workplace Health and Safety standards and our Plumbing for retail food businesses guidelines
- ensure adequate clearance above the grease trap (at least equal to the deepest part of the greasetrap) to allow for safe, easy access to clean and inspect it
- ensure stands, walkways and steps meet Australian Standards and Workplace Health and safety guidelines.
Which grease extractors meet our requirements?
| Manufacturer | Item |
|---|---|
| Aglass Pty Ltd (02) 9790 8733 |
AGL1000 AGL-500-GA-SL-A AGL-500-GA-SL-B Both fitted with Zabel filter |
| Halgan Pty Ltd 9972 1355 |
ECOTEC s100 Grease Extractor |
| Gebel Aquasafe 4722 9696 |
Aquasafe Grease Arrestor with Zabel A300 filter |
| Eclipse Environmental 9721 3071 |
Delta 1 |
| Manufacturer | Supplier's item |
|---|---|
| Environmental Biotech 0418 688 849 |
Grease Eradication System - GES |